Page 1 of 1
Neck Length Short Scale / Regular Scale ?
Posted: Thu May 03, 2007 12:13 pm
by HappyTom
what fretboard length from end to end is short scale and what length would be regular? I think my bass neck is short scale..
Thanks!
Posted: Thu May 03, 2007 2:36 pm
by Arjen
34" is a regular scale lenght. 32" or 32.5" would be shortscale if I'm correct.
But that's the length measured from nut to the bridgesaddle.
Posted: Thu May 03, 2007 5:30 pm
by FretLessSince68
30" = Short scale
32" = or anything between 30' and 34' is Medium scale
34" = Standard (Fender) scale, aka Long Scale
35" or 36" = Extra Long scale, aka Super Long
The shorter the scale length, the less string tension to derive a particular pitch. Strings designed/wound specifically for short scale attempt to compensate for the lower tension.
In general the lower pitched strings on short and medium scale instruments feel flabby to me (IMHO).
Using Standard scale strings on a short scale instrument is a prescription for flab.
When deciding on strings for your instrument it is important to know it's dimensions. The length from the ball end to (through) the nut is critical. For taper core strings be sure that the taper occurs at a location that will not interfere with the bridge/saddles.
The wound, or wrap, length varies from maker to maker and there are no guarantee of proper fitment.
The most usual problem is finding E and B strings for Extra Long scale axes. Always check the fit of the big strings (if possible) before laying down your cash on a new set of strings.
If you find that an individual string winding,wrap does not quite pass through the nut (but is close) shaving some silk where it passes through the nut may get you the extra 1/8 or 1/4 inch you need.